Image 1 Image 2 Image 3

The Chemical Peel VS The Micro Laser Peel

By Ann Carter


Both of these are being used for the treatment of some skin conditions which are often associated to the lifestyle and the aging of a person. Some of the conditions are smile lines, freckles, sun damage, mild wrinkles, scars, keratosis, and uneven pigmentation. Both of these are used through the removal of damaged parts in the outer layer of the skins. This is done in order to improve the texture of skin and also to give a better complexion and more vibrant glow.

Between the two, in Cincinnati, OH, laser peels are the most commonly used. Micro laser peel Cincinnati is performed to remove some damaged layers in the outer part and replace these with a newer, healthier, and more vibrant skins. These type of lasers stimulate the new collagen production, thus, helping the reduction of fine line and wrinkle appearance. It can also give a suppler, more softer and tighter feeling.

The results of treatment will depend on the type of condition and skin the patient has. Only one laser therapy may not be capable on treating all skins and condition types but most clinics prefer on customizing therapies by combining many types of it. One example of this is the combination of micro lasers and a photorejuvenation or a profractional type. By this, better results can be achieved.

So if you are starting to feel like you have skins that lack radiant glow, youthfulness, or may be having some blemishes and fine lines, this kind of treatment can be the best for you. This became very popular to those people who already have experienced the microdermabrasion therapies but still are not satisfied with the results. So if you are looking for a treatment which is more effective, try the micro laser peel.

This paragraph are some procedures to be done when performing the treatment. First is to let the patient undergo a preparatory treatment for the skin for a rejuvenation. Second is the areas to treat will be cleaned. Third is to use cool air to soothe and anesthetize the skin. Fourth is to target the laser to the areas and a scanner removes the thin layers and the damaged tissues.

Typically, the average number of days for its healing process takes two up to four days. But those deeper lasers treatments typically take more than four days. Side effects may occur upon using it like sensitive and red skins that is similar to having sun burns but it often just disappears after three days.

While the chemical peel will use some chemical solutions, usually those that are acid based, in order to remove skins outer layers. This type is divided into 3 peels, the medium, deep, and superficial. Deep peels now are already been replaced with the laser resurfacing. While the light and medium peels are still the most popular ways for skin refreshment.

Chemical solutions typically are applied to faces within thirty to forty five minutes. A light peel has a zero delay. To achieve better outcomes or results, it is recommended to apply these several times.

The heavier peels causes the skin in getting red or may be swollen in a few days. And in a week it may also become crusty and will start to peel and flake. Improvements can be seen after a single application, but multiple applications still have better results.




About the Author:



No comments:

Post a Comment

Comments system

Disqus Shortname